SAY HELLO TO YOUR CATCH
LOADING A FILM
USING YOUR CATCH
Your CATCH is loaded with an AA battery. If the flash stops working, you will need to replace it with a new battery via the underside of the camera.
DON'T OPEN THE BACK
Don't open the back of your CATCH once you have loaded a film. It exposes the film to light and damages your photos.
FLICK FOR FLASH
Activate the flash by flicking the switch on the front left and use when inside or there is low light. And, turn it off when you aren't using it.
10% OFF FILM
Use the code 'JUSTLANDED' to get 10% off your next film
The camera has a wide lens so will get more in the shot than you can see through the viewfinder - get up close to your subject.
Keep the sun behind you when outside, use the flash when indoors and make sure your subject is well lit.
Play around with different compositions, distances, types of light and see what works for you - embrace the unknown and see how your photos come out.
Seach 'film development' online to find your nearest film development lab (usually Snappy Snaps or Boots) - we recommend getting your photos emailed to you and then printing any you really like.
1. Finish your film and remove it safely (see video below)
2. Take or send your film to be developed
3. Receive your photos back via email and please share them with us if you'd like
UNLOADING A FILM
How do I load a film?
Watch the video above or follow this link to launch externally
Please ensure you have followed these steps and that the film is hooked into the notches on inside the camera, and has been fully wound until it stops.
Do you develop the films?
No, at the moment we do not offer development services. We are working to provide this as a service in the future
Can I return the camera?
Yes, you can return the camera within 30 days of purhcase. Please email us on email@example.com and we will send you a returns label.